The Kiwami, which translates to Extreme Gloss, is a great product for those who desire perfect balance between glossy finish and protection. Extreme Gloss is very easy producing a strong beading effect. Making your car paint shiny and smooth as silk! Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car colour is compatible with product.
1. Wash and decontaminate car surface.
2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.
3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.
* Drying time may be longer in cold temperature.
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Another product from the renowned Fusso family! You can feel safe about your car paint for up to 9 months after applying this product, hard polymer formed creating a protective, shiny and water-repellent shield! Improved gloss components will enable you to achieve even deeper shine on your car’s body. Mirror Shine is one of the quickest paint protection to apply - you apply it straight onto the paint with the included microfiber cloth, the effects are immediate! Available in two tones variation to produce best results depending on your vehicles paint colour.
Directions
1. Prepare vehicle by washing it thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, a cleaner or other products.
2. Apply product onto included microfiber cloth.
3. Polish liquid firmly onto surface, panel by panel and you’re done!
Another product from the renowned Fusso family! You can feel safe about your car paint for up to 9 months after applying this product, hard polymer formed creating a protective, shiny and water-repellent shield! Improved gloss components will enable you to achieve even deeper shine on your car’s body. Mirror Shine is one of the quickest paint protection to apply - you apply it straight onto the paint with the included microfiber cloth, the effects are immediate! Available in two tones variation to produce best results depending on your vehicles paint colour.
Directions
1. Prepare vehicle by washing it thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, a cleaner or other products.
2. Apply product onto included microfiber cloth.
3. Polish liquid firmly onto surface, panel by panel and you’re done!
Forget about water spots! Water Block is a sheeting wax that will make water simply slide down your car paint. Blended carnauba and high-adhesive polymers create a great combination of hydrophobicity and natural shine. Combine this wax with products from the Glaco series to create an ultimate raincoat for your car! Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car colour is compatible with product.
* Wash off any sand, dust, and dirt, and wipe off any remaining water drops.
1. Take a moderate amount of the wax and spread it evenly onto car's body using the included sponge.
2. After the surface gets dry (5-10 minutes), wipe off with a soft clean towel.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer
Forget about water spots! Water Block is a sheeting wax that will make water simply slide down your car paint. Blended carnauba and high-adhesive polymers create a great combination of hydrophobicity and natural shine. Combine this wax with products from the Glaco series to create an ultimate raincoat for your car! Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car color is compatible with product.
* Wash off any sand, dust, and dirt, and wipe off any remaining water drops.
1. Take a moderate amount of the wax and spread it evenly onto car's body using the included sponge.
2. After the surface gets dry (5-10 minutes), wipe off with a soft clean towel.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer
Cleaner design for glass/ceramic coating contains only mild cleaning ingredients. Restoring brightness of coated vehicle body. Symptoms such as water spots, small scratches on door knobs can be easily removed!
Direction
1. Wash off dirt, dust or mud, and wipe off water.
2. Shake bottle well.
3. Pour a coin size amount of liquid onto included towel.
4. Rub towel onto surface one panel at a time on affected areas.
Formulated ""Repair Coat"" repairs damaged professional body glass coating, and restores water repellent effect. Just spray on wet body of vehicle after car wash, wipe down surface and you're done! Coating will form a water repellent layer leaving the surface feeling smooth as a peeled boiled egg. Can be used on vehicles without ceramic/ glass coating. Feel free to use on wheels, windows, headlights, tail lamps, plastic parts, vehicle interior, etc. Compatible with any colour vehicle paint.
Direction
1. Remove dust and dirt with water. For best results, use 'SMOOTH EGG Shampoo for Repair'. Do not dry vehicle completely after washing.
2. Spray liquid on wet body of vehicle. * Apply roughly one spray per 30 cm2.
3. Fold included cloth into quarters and wipe down the body of vehicle, wring the cloth to dry as needed.
A pH neutral shampoo best dedicated for maintaining cars with professional coatings, can be used as a standalone maintenance product. Shampoo causes water to glide off when the car is being rinsed, leaving less water drops behind meaning less drying time. The shampoo produces best results if used in conjunction with other products from the SMOOTH EGG series.
Direction
1. Rinse car with water, remove dust and heavy dirt in order to prevent scratching paint.
2. Pour shampoo into bucket or apply squirt directly onto a sponge, create lather, then wash whole vehicle.
3. Rinse vehicle with water and dry using microfiber towel.
BLACK BLACK creates a thick-film coating on tires and maximizes shine along with super durability. The non-sticky, hard coating prevents dirt from adhering, which helps your car maintain ideal conditions by simply washing. The coating lasts for more than 60 days, and this rubbing type does not splatter over other parts.
Directions
* Be sure to wear protective gloves. * If the tire is very dirty, remove unwanted residue in advance. * Do not use this product on wet tires.
1. Shake bottle well and put liquid on black side of included sponge. Allow enough liquid to soak thoroughly into applicator sponge.
2. Apply to tire and spread evenly across the tire.
Apply repeatedly until desired level of gloss is achieved.
3. Allow coating to dry for approximately 5-10 minutes after applying.
* If liquid gets into unwanted parts, wipe it off immediately with a clean towel or SOFT99 Silicone Off (sold separately).
Creates transparent glassy "Nano crystal coating" and ultimate shine on old plastic parts, lasts more than 6 months. Can be used on heated parts such as car or motorcycle's engine cover and silencer. Compatible with unpainted resin parts on car, motorcycle, home electric appliances and even office chairs!
Direction
1. Clean surface ensuring there is no dirt or oil, completely dry prior to applying.
2. Take liquid on black side of included sponge and spread evenly. * Do not reuse old sponge.
3. Allow to dry for 5 min, wipe off evenly with dry clean towel. * Do not touch or wet car for 24 hours after applying. Coating takes 3-4 days to harden completely.
Restore headlights, blinkers and taillights. Light one is a multi-step restoration kit that gives your headlight lenses a deep clean and removes haze and discoloration.
Direction
1. Remove dust and dirt prior to cleaning and application.
2. Shake "Base Cleaner" bottle well, pour liquid onto included cloth and polish lense.
3. Wipe off with clean side of cloth.
4. Shake "Hard Top Coat" bottle well, pour liquid onto included sponge and spread evenly allowing to dry for 1 minute.
* The coating film takes 3-4 days to harden completely. Do not touch or wet the car for 24 hours after applying.
Formulated to coat polycarbonate plastic and glass, such as headlight covers, side visors, tail lamp covers, helmet shields and goggles. Specially designed curved applicator and included microfiber cloth for ease of application. Repels water under air pressure when driving. If you are a motorcycle or race car enthusiast, this product sure is suited for your needs!
Direction
1. Prepare the surfaces by washing and decontaminating.
2. Take off the cap and apply directly with felt applicator.
3. Apply gently ensuring full coverage.
4. Immediately wipe off with included towel.
*No need to wait for drying. Wipe off immediately before liquid gets dry.
Clay bar removes unwanted residue such as iron powder, pitch, tar, bird droppings or dead bugs which cause low gloss and dull on the car. It is more effective to use before polishing, waxing or coating.
Direction
1. Wash car to remove sand or dust.
2. Knead clay bar by hand until it's soft and flat.
3. Rub lightly on car surface and wet area being cleaned.
4. If surface of clay bar gets dirty, refold and continue to use clean surface as needed.
Note: Always let the clay bar do the work never add pressure on the surface. Always lubricate with water or shampoo water when using clay bar on surface.
Spot stain remover kit for fabric seat which is effective for removing stubborn stain. Three simple procedure "Wash"→"Rinse"→"Absorb" can remove stain using our exclusive liquid and HPVA sponge. Can remove up to 30 fifty cent coin size stain. * HPVA=Hexagonal Polyvinyl Alcohol
Directions
1. Soak sponge in water and squeeze allowing sponge to become moist.
2. Shake bottle well and apply 5 drops of liquid onto sponge.
3. Press and tap sponge on stained area. Cleaning liquid will react with stain and loosen it from the fabric fibres.
4. Rinse sponge.
5. Remove stain from fabric seat by using hexagonal side of sponge to absorb. Rotate each side continuously.
6. Rinse sponge and use flat clean side to absorb remaining excess liquid.
This is new line up for "Glaco Wiper" series which is well designed 3D aero form wiper blade. Strong for wiper judder and makes stable wiping performance. Tournament type wipers attach with aero form cover which looks beautiful design. Once operate wiper, creates strong water beading and ensure high visibility.
Best fit
Hook-type arms
Direction
1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper. 2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.
3. Operate the wipers about 10 times.
4. Make sure the wipers and spoiler do not touch the body.
5. Operate the wipers on a dry windshield for about 3 minutes.
* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.
* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.
* If use window high detergency wash fluid, water repellent effect may be weaken.
* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.
* Immediately replace wiper when decrease wiping or water repellent performance.
* Recommend to replace the wiper rubber every half year.
Glaco Wiper New Aero Design
This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.
Forms a coating film that repels rain
With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.
Wedge-shaped cross section to prevent "lifting"!
The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.
Dead bugs, bird droppings and tree sap can cause damage to car paint. Not with FUKUPIKA Bugs& Droppings Removal, simply just wiping, removes and completely cleans the car's surface. Compared with conventional cleaning wipes, this wipe makes it possible give the car a nice clean surface finish, without leaving behind any white residue. The products does not contain any petroleum solvent, making FUKUPIKA absolutely eco-friendly!
Direction
1. Take out one sheet from package.
2. Do not rub with excessive force. If removing heavy dirt, wipe and allow cleaner to penetrate dirt, then gently wipe area. Results may vary depending on the contamination and adhesion of dirt.
3. When removing mud, sand, and dust, wipe off surface lightly and finish with a cleaner side of wipe. * If white residue of cleaner remains on surface, wipe off with a clean wet towel.
4. If whole sheet gets dirty or dry, use another sheet. * Seal package firmly, in order to prevent sheets from drying out.
Contents - 40ml Base Cleaner, 8ml Coating Liquid, 4 x Special Sheets, 4 x Sponge
Features
Restoration for unpainted resin parts such as a bumper or around wipers. Included 'Liquid Binder' removes dirt marks from the surface of resin parts, and 'Hard Clear Coat', creating a Silicon-based thick hard film coating.
Direction
1. Remove dirt, oil and any other unwanted residues from surface.
Dry completely.
2. Apply a small amount of “Liquid Binder” onto included sheet, then spread thinly and evenly.
3. Wipe off with clean side of sheet.
4. Detach one sponge, apply “Hard Clear Coat” onto black side of included sponge and spread evenly.
Prevents tires and plastic leather from deteriorating, also gives a glossy finish to the surface. Wax brings out the maximum natural shine in the texture of the material. Wiping not necessary when using on tire. When using on leather, wipe off with a cloth after spraying.
Direction
1. If you use tires, wash off mud or dirt in advance.
2. Hold about 15-25cm away from the tire sidewall and spray evenly.
If applying on leather spray and spread thinly with a dry cloth.
By just applying the wax with included microfiber cloth, Mirror Shine WAX will create a mirror-like clear gloss and shine. This solid wax creates a thick-film coating without the need to wipe or dry, and it lasts for up to 3 months. May be used on plastic parts as well, such as headlight covers, car visor and tail lamps.
Direction
*Make sure car colour is compatible with this product. * Wash and decontaminate car surface.
1. Take wax using included cloth and apply evenly to car surface.
2. All you need to do is polish firmly on the surface, there is no need to wipe off.
*Make sure to finish the entire process. If left unfinished, it may cause spots or unevenness. *For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Abrasives for correcting and finishing automobile paint
Formulated for efficient correction (scratch removal), polishing, and high-gloss finishing of automobile paint. Suitable for machine polish only
Cutting Compound 300ml Remove scratches, orange peel, and sandpaper marks with Cutting Compound Wool buff pad @ 1800rpm
Polishing Compound 300ml Remove marks from Cutting and bring to a gloss with Polishing CompoundSponge/Euro foam buff pad @ 1500rpm (if sandpaper marks remain, use wool)
Finishing Compound 300ml If desired, bring paintwork up to perfection with clear gloss then finish with Finishing Compound Sponge/Euro 'finishing' foam buff pad @ 1300rpm
Excellent properties with results:
Suitable for all types of automobile paint
Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring
New anti-clogging, low dust formula improves working conditions
Can be used as a two- or three-step process, as needed
Contain no silicone, gloss-enhancers, or any other unnecessary additives
Remove marks from Cutting and bring to a gloss with Polishing Compound
✔ Suitable for all types of automobile paint ✔ Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring ✔ New anti-clogging, low dust formula improves working conditions ✔ Can be used as a two- or three-step process, as needed ✔ Contain no silicone, gloss-enhancers, or any other unnecessary additives
Recommended Pad & Speed
Sponge/Euro foam buff pad @ 1500rpm (if sandpaper marks remain, use wool)
Smooth Egg platinum is our top of the range spray sealant. It contains 4 different types of resins, resulting in a wet look, hydrophobic surface and leaving a slick finish on the bodywork. Durability of product will last up to 3 months. Can be applied when vehicle body is still wet after maintenance wash.
Direction
1. Remove any dirt on car bodywork with car shampoo.
2. Rinse off with water.
3. Detach trigger and spray onto wet car body. * 2 Spray will cover an area of 50cm2.
Just spray and wipe to freshen up your vehicle’s bodywork, removing light dust and dirt while applying a highly durable Fusso coating, cleaning and coating in one step! The wax coating is reinforced with fluoro polymers to enhance and extend hydrophobicity for up to 180 days. Perfect for maintaining Fusso Coat. Contents will treat 5 mid-size vehicles.
Direction
* Before applying dirty vehicle, be sure to wash dirt off and dry to avoid scratches.
In cases of staining, use specialised cleaners 'Silicone Off'.
1. Shake well and switch nozzle to ON.
2. Spray surface of vehicle, 1 spray for every 30cm2 area.
3. Without allowing to dry, lightly wipe across the surface with a clean, dry towel.
Refold the towel to expose a fresh surface when wiping becomes difficult.
A must have product for all detailers and enthusiast to buff off wax or sealants. ‘Wipe Cloth' has low oil absorption leaving the wax and gloss on the surface of the surface of the vehicle and not absorbing into the cloth. Cloth is washable so can be used repeatedly.
✔ QUICK EASY CLEAN & WAX CAR ✔ NO RINSING OR DRYING REQUIRED ✔ WATER REPELLENCY UP TO 1 MONTH ✔ CAN BE USE ON CERAMIC COATED VEHICLES
Triple-layer sheet for easy washing and waxing. Central layer designed for absorbing dirt to keep the outer layers clean. Helps prevent scratches and supports the structure of the outer layers to glide lightly and effortlessly over your vehicle. Leaves your car clean, shiny and with water repellency up to 1 months.
Direction
1. Open the front flap, and pull out one wipe.
2. Fold the sheet into quarters and lightly wipe down the body of the vehicle. Keep refolding the wipe to expose fresh surfaces and avoid spreading any dirt.
3. In particularly dirty areas, gently wipe off the dirt, then with a fresh surface of the sheet wipe of again.
4. If the entire wipe is dirty or becomes dried out, please use a fresh sheet.
Unique mist-mousse spray system accelerates the process of tire dressing, cutting down working time to a quarter that of conventional products. Unwanted residue just melts off and away from the tires, leaving them with a beautifully even shine. Two types of high viscosity silicones adhere to the tires, giving them a glossy, waterproof barrier.
Direction
1. Wash off any excess dirt beforehand if necessary.
2. Shake well and spray onto wet or dry tires.
3. Wait to dry before driving, or wipe away excess liquid with a cloth.
This is new line up for "Glaco Wiper" series which is well designed 3D aero form wiper blade. Strong for wiper judder and makes stable wiping performance. Tournament type wipers attach with aero form cover which looks beautiful design. Once operate wiper, creates strong water beading and ensure high visibility.
Best fit
Hook-type arms
Direction
1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper. 2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.
3. Operate the wipers about 10 times.
4. Make sure the wipers and spoiler do not touch the body.
5. Operate the wipers on a dry windshield for about 3 minutes.
* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.
* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.
* If use window high detergency wash fluid, water repellent effect may be weaken.
* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.
* Immediately replace wiper when decrease wiping or water repellent performance.
* Recommend to replace the wiper rubber every half year.
Glaco Wiper New Aero Design
This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.
Forms a coating film that repels rain
With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.
Wedge-shaped cross section to prevent "lifting"!
The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.
Powerful, pH-neutral, and compound-free, this high-powered shampoo lathers into a thick, creamy foam that just melts the dirt away. Professional size and packaging. Despite its powerful foaming ability, this product has been designed with ease of rinsing in mind. May be used on coated vehicles, diluted 1:50. Compatible with water- and air-driven foamers.