Exterior Car Care

Contents - 1x Wheel Cleaning Sponge

Features

Designed to make cleaning easy for both wide areas and tight spaces, the high quality construction of this wheel-cleaning sponge makes it both flexible and sturdy. Unique cellular construction removes dirt efficiently and ultrafine cut-pile microfibers loosen dirt without clogging. Durable inner sponge and innovative glue-free fixings retain elasticity - a long-lasting tool that maintains performance.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

If washing with water only, thoroughly wet the wheel before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Contents - 500ml

Features

Gel type spray glass cleaner lets you clean the glass easily without any liquid or water droplets leaving residue. The cleaning components are held in the gel, giving time to penetrate dirt and increase the effectiveness of cleaning stubborn dirt, such as bird droppings. Also suitable for use on mirrors, unpainted plastic, and rubber parts.

Direction

1. Turn the spray nozzle to “ON”.

2. Without shaking, spray onto the glass surface from 15 – 20cm away, then immediately wipe around the glass with a clean, dry towel.

3. Wipe up the dirt, changing to a fresh surface of the towel when necessary.

*If some residue remains on the glass, wipe again with a clean towel.

Contents - 400ml

Features

Just spray and wipe to freshen up your vehicle’s bodywork, removing light dust and dirt while applying a glossy and hydrophobic hybrid coating.

Direction

1. Shake the bottle well before use.

2. Turn nozzle to on and allow 1 spray for every 30cm square area on dry paintwork, wipe off with clean dry towel immediately.

When spraying directly to microfiber towel, spray twice than usual amount and work into paintwork

* If heavily soiled, wash off dirt and wipe off water otherwise it may cause unevenness or streak mark.

* Change the towel surface when it gets dirty.

Applications

Contents - 100ml, 2x Applicator Pad, 2x Microfiber Towel

Features - 2 Years Durability Hydrophilic Coating

H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion

FIELD TEST RESULTS

Drainage Performance Test – Water on hood receding

Less Frequent Visit to Car Wash

3 Months  Outside Exposure Test comparison to generic body glass coating

 
VENDING MACHINE (6 MONTHS AFTER APPLICATION)

MARINE BOAT (12 MONTHS AFTER APPLICATION)

OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)

 
Direction

1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.

2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.

3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).

4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.

5. After coating, leave to cure in a dry place for 12 hours.

CAUTION!!!

Contents - 4000ml

Features

pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.

Direction

1. Wash off sand, mud or dust prior to spraying.

2. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.

3. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.

* When spray over brake disc, it reacts and changes colour.

Rinse away immediately, if left on too long, may cause bad effects for brake disc.

4. Wipe off with clean towel.

Carry out brake test with low gear 2-3 times after cleaning.

* This product is formulated for wheel.

If use for car body, carefully rinse off with water afterwards.

Contents - 1pc (640x230mm)

Features

Highly absorbent cloth can be used in various ways. Spread out, it can dry large areas very quickly, and can also be folded for use e.g. with coatings. Twist pile substructure massively reduces drag for light work and the 4Pocket structure makes work less tiring.

Direction

By putting both hands in the pockets, the towel can fit to contours and dry large areas.

Be sure to avoid touching the ground.

Easy fits into the grill or under visors to make drying awkward spots easy.

Absorbs well from glass surfaces also.

By folding the cloth, absorption power can be increased.

Contents - 250ml + 1 Applicator

Features

Suitable for polishing dark colour paint. Ultra-fine powder suspended in liquid form to remove deteriorated coatings, marks and light scratches from paint. The included sponge helps achieve a professional-level finish with only hand polishing.

Direction

Use on washed and dried paintwork.

1. Put a moderate amount of product on the black surface of the sponge.

2. Rub with appropriate force on scratched or dirty areas.

3. When finished, wipe off with a soft clean towel.

Contents - 250ml + 1 Applicator

Features

Suitable for polishing light colour paint. Ultra-fine powder suspended in liquid form to remove deteriorated coatings, marks and light scratches from paint. The included sponge helps achieve a professional-level finish with only hand polishing.

Direction

1. If you use tires, wash off mud or dirt in advance.

2. Hold about 15-25cm away from the tire sidewall and spray evenly.

If applying on leather spray and spread thinly with a dry cloth.

Contents - 1x Coating Agent bottle (15mL), 2x Hard Sponge, 2x Soft Sponge, 3x Silicone off Wipes Sheets, 2x Gloves

Features

Bring the life back to faded plastic and rubber trim! This treatment restores the deep darkness, natural gloss, and rich texture of black trim to revitalize your vehicle. The unique coating liquid penetrates into the surface and polymerizes to form a flexible yet glossy surface, making it suitable for restoring both hard plastic and soft rubber!

Direction

Note: Apply only to clean, dry, unpainted plastic and rubber.

1. First clean and degrease the area to be treated using the included ‘Silicone Off’ degreasing sheets.

Note: Some textured plastics may pick up fibers from the sheet. Remove these before proceeding. To prevent the sheets from drying out, firmly seal the package between uses.

2. Cut sponge to suitable size for area to be treated. The black sponge is for hard plastic, the white sponge is for soft rubber. Apply a small amount of the liquid (green label), and spread thinly and evenly across the surface to be treated.

Note: Some rubber parts may absorb the liquid. Keep applying until enough liquid remains.

3. After drying for around 5 minutes, use a fresh sheet to lightly wipe up the surface for an even finish. If left for too long, the excess will not be possible to remove.

Note: Do not touch or wet for 24 hours. Do not reuse sponges that have hardened. If the liquid unintentionally comes into contact with another surface, wipe off immediately.

Contents - 230ml + 1 Wipe Cloth

Features

Our newly developed quick coat not only gives your vehicle water-repellent Hydropolymer layer, but prevents water stains with its unique Hydropeeling technology. When a vehicle coated with Smooth Egg Hydro Flash is wet with rain, the residue that would normally result in a stain is carried away along with a small amount of the polymer. This is seriously strong protection. By including a specially formulated levelling agent, we are able to keep our Hydropolymer evenly adhered to your vehicle… and that keeps your car shining beautifully, with a gloss that withstands the elements. This product is suitable for use on wet or dry coated and uncoated vehicles, and may be used on all exterior and interior parts except upholstery. One bottle treats a medium-sized vehicle eight times.

Direction

Note: Before applying Smooth Egg Hydro Flash, be sure to wash your vehicle.

Drying is optional.

1. Shake well, remove the trigger lock, and spray onto the body, 1 spray for every 30cm² on dry car body, if car body is wet 1 spray for every 15cm² area

2. Wipe off quickly with the included cloth.

Work on a small area at a time.

Contents - 500ml

Features

With Stain Cleaner Strong Type, all you need to do is spray and wipe it off. The white powder won't remain on the surface and re-wiping is NOT necessary. It chemically breaks down and gets rid of stubborn dirt, which normal car shampoo couldn't do. Abrasive compounds are NOT included, so it won't damage your car paint. The fresh scent of grapefruit gets rid off bad odor during the process.

Direction

* Remove dirt from the car in advance.

1. Shake the bottle well.

2. Turn the nozzle to <ON>, and spray it on the surface.

3. Wipe it off with a dry, clean cloth.

Contents - 100ml

Features

Liquid penetrates effectively between the space of adhesive and bonded surface allowed easy removal of sticky adhesive residues.

Direction

* Cut the end of a nozzle into the desired size. 

1. Shear off the edge of a sticker and spray into gap with a small amount of liquid. Then, using the included spatula rub the sticker until it goes off. 

2. In case any glue residue still remains on the surface, it's best to spray it again and let it soak for a while. Then, using a soft cloth try to rub it off. If the glue residue remains on the surface repeat process until completely removed.

Contents - 1pc

Features

Contents - 120ml

Features

Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Just by driving at 45 km/h or more, all the water will fly off the glass! Significantly reduces the stress and danger of driving in the rain, especially at night. Treating your glass is made easy with the built-in felt applicator.

Direction

*Note: Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.

3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel.

Contents - 200g

Features

‘The Kiwami’ is a carefully crafted blend of the finest Carnauba wax, reinforced with our latest synthetic polymers. This blend is designed especially to bring a dazzling gloss and sparkle to the paintwork of your silver vehicle for up to 3 months. This is the ultimate wax for gloss. This is ‘The Kiwami’.

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.

3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

* Drying time may be longer in cold temperature.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.

Contents - 110ml

Features

Using the newly developed S.A.R.F. (Strong Adhesion + Rapid Finish) technology, the latest generation of Glaco creates an ultra-smooth layer that pushes away rain more powerfully than ever before... and it lasts for 4 months!
The swivel-head and large, square application felt allow for much easier application and make sure the corners get a proper coat.
Also repels traffic film, snow, and frost!

Direction

*Note: Wash away dirt and dust, and dry completely before application. Unscrew the cap and remove.

1. Press onto the glass and gently squeeze to release the liquid, allowing it to soak into the felt head.

2. Apply to the glass in a criss-cross pattern, squeezing to release more liquid as necessary. Leave no gaps.

3. Dry for 5-10 minutes, and wipe up with a tightly-wrung out damp towel.

Incomplete removal may lead to wiper judder.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 400ml

Features

This non-abrasive deep clean can dissolve unsightly residues on wheels. The foam is easy to apply, and does not drip off, allowing the chemical components to work on loosening and lifting the dirt. The included sponge makes it easy to agitate dirt out from tight spaces. Suitable for aluminium and steel wheels.

Direction

1. First use water to remove what dust and dirt can be rinsed away.

2. Shake well and spray over the entire wheel. If the trigger is l℃ked, turn the nozzle to open.

3. Let sit for 2-3 minutes, and then agitate with the provided sponge to lift dirt from the wheel surface.

4. Rinse thoroughly with water to remove all cleaner and dirt.

5. Wipe off remaining water.

6. Check brakes at low speed before driving.

Contents - 420 ml

Features

Just spray on and wipe off to remove dead bugs, tar, and other oily dirt. It really is that so simple! It also creates a temporary anti-fouling coating to prevent adhesion of dirt.

Direction

* Use on a washed and dried vehicle.

1. Spray on the dirty area from a distance of 20-30 cm.

2. Wipe off with a dry towel.

Contents - Abrasive 80ml, Ultrafine pad L ×1, Ultrafine pad S ×1, Compound Sponge ×1

Features

The high-gloss black plastic known as piano black shows scratches very easily, and can show age much more quickly than paint or other areas of the vehicle. This kit makes it easy to restore painted and unpainted piano black and other high-gloss plastics by hand, refining them to a near new condition.

Direction

Note: Be sure to thoroughly clean and thoroughly dry the area to be treated, and mask off neighbouring areas. Use a scratch removal compound (sold separately) with the compound sponge to remove any deep scratches beforehand.

1. With the cap closed, shake the bottle well.

2. Choose an ultrafine pad size appropriate or comfortable. Apply a moderate amount of compound to the black surface of the pad. Polish the surface while spreading the liquid in horizontal and vertical motions. Aim work on one 30&times;30 cm area at a time.

3. After polishing, remove any masking and wipe up any residue with a soft, clean towel.

Contents - 1pc

Features

Stain Eraser for Natural Tanned Leather can remove dirt from leather products such as: shoes, bags, belts or jackets. It is as easy as if you were erasing words with an eraser. It does not require you to use water and cleanser, which does not leave any unwanted stains or spots. Includes convenient to carry protection case. If you bring it in your bag, you can use it easily wherever you are and whenever you want.

Natural Tanned Leather
Abrasive compounds are not included so there is no damage to the leather surface after unwanted residue is removed. The eraser shavings are splatter-proof and are very soft. We recommend you use this product specifically for white leather where dirt is easily visible.

This eraser is shaped with exclusive, extra fine fibers. It gently removes dirt from suede leather or velour which can easily be damaged.

Contents - Cleaner (120mL) x 1bottle, Brush x 1pc, Cup x 1pc, Gloves x 2pcs

Features

This is acid type wheel cleaner, can dissolve burned iron powder and brake dust which cannot remove by conventional wheel cleaner with easy procedure.
Strong acid cleaner dissolves heavy iron powder, which stuck against wheel, without damaged paint surface.

Direction

1. Remove dirt or oil by car shampoo and wipe off thoroughly.

2. Be sure that wheel is cool and confirm the area where iron powder is accumulated.

3. Take moderate amount of solution into attached cup, and start applying accumulated area with brush.

4. Let sit 10 minutes, buff off with clean towel. In case of difficultly wiping off once, repeat procedure 3 and 4.

* Application is up to 3 times.

5. Afterwards remove residue by rubbing with water.

* If rinsing is not enough, wheel might discolour, blushing and cause stain.

Contents - Primer 100ml, Top Coat Liquid 100ml, Sponge with Buff x 2pc, Cloth x 2pc, Gloves x 2pc

Features - 5 Years Durability Coating

H-9 Dual Layer Glass Coat is super water repellent type glass coating which make use of the Japanese state of art technology. Combines 2 different types of glassy layer creating a 9H pencil hardness. Long lasting deep gloss and shine, protects from harmful elements such as dirt, bird droppings, traffic grime, UV light, water, acid rain and light scratches.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Hardness – 9H Hardness excellent resistance against micro scratches caused by wind dust and dirt

✔️ 5 Years Durability – Durability based on field and accelerated weather testing according to Japanese Industrial Standards(JIS)

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

Outside Exposure Test (After 5 Months)

After 5 months SOFT99 H9 Dual Layer Glass Coat still holding up with strong water repellency.
Generic body glass coating and fluorine based coating effect can be seen to have worn off.

Contents - 200ml

Features 

Carbon black and blackshine carnauba combine to create beautiful, natural black sheen for tyres. With a sleek black look, this tyre wax protects tyres from fading or browning due to UV, dirt, etc. Excellent water-resistance ensures the effect lasts for at least 2 months, without the use of hydrocarbon solvents. The wax-based formula guarantees no sliminess or slinging. Includes two 'Pitasupo' tyre sponges, for easy application.

Direction

Note: Shake well before opening. Use included gloves. Do not use on wet tyres. When particularly dirty, was tyres first with water, and dry before use.

1. Remove cap, apply 3 lines of liquid across the sponge surface.

2. To prevent dripping, start from the bottom of the tyre, and apply evenly to the whole.

3. After application, dry for at least 10-20 minutes, depending on temperature.

Note: To avoid slinging onto the body etc., do not drive until fully dry. Depending on the condition of the tyre, some unevenness may occur. In that event, allow to dry, and apply more liquid to create an even appearance. DiGloss Pitasupo Tire Sponge is also available for purchase separately. To increase gloss, polish gently with a cloth after drying.

Contents - 750ml

Features

A combination of pH-neutral surfactant and mild cleansing powder removes stubborn dirt and water marks from ceramic-coated vehicles, without damaging the coating itself. This product is compatible with all colours.

Direction

1. Rinse off dust and sand with water.

2. Shake well and open the shampoo, apply generously to the included sponge, and wash the vehicle.

3. Rinse thoroughly and remove leftover water droplets with a towel or cloth.

Contents - 800ml

Features

Brown staining on wheels and tyres really ruins the whole look of a vehicle. This newly-developed spray reacts
with contaminants, even when embedded in the rubber, dissolving them to make it easy to simply rinse away the
dirt. The sophisticated formula is gentle to wheel and tyre, but extremely powerful against oily grime and tar. Specialised grip makes for easy use, with generous contents that can treat approx. 20 wheels and tires.

Direction

1. Rinse surface with water to remove any dust or dirt.

2. Set nozzle to the ON position, and spray over entire surface without opening the white flap. Use around 40 shots for an average wheel.

3. Wait around 30 seconds for reaction, before scrubbing with a brush.

4. Ensure to rinse thoroughly with water, and dry with a towel. Failure to remove all product may damage surfaces.

5. Rinse nozzle with water after use.

Note: Test brakes at low speed after use. We recommend DiGloss Kamitoré series for effective tyre-cleaning tools. After use, protect your tyres with DiGloss Black Devil Tire Wax!

Contents - 300ml

Features

It removes dirt such as carbon or sludge accumulating on the inside of the injector or combustion chamber, and restores the engine power.

Direction

1. Leave the car idling for approximately 5-6 minutes to warm the engine.

2. Stop the engine and loosen the rubber hose a bit to make enough space to insert the tube to let you spray toward the throttle chamber.

3. Turn on the engine and use a whole bottle while keeping idling at about 2000 times engine rotation.

4. Meanwhile leave it for approximately 5-6 minutes after the engine stops, and reset the rubber hose. Afterward turn on the engine and snap until white smoke is not produced.

* Be sure not to spray over the Air flow meter.

Contents - 4pcs

Features

A specialised sponge for tyres, which removes the need to move the vehicle for a complete application.
The fine edge allows application of tyre waxes etc. right up to the edge of the rubber, without getting the wheel dirty.
The V-cut grip prevents slipping, and the urethane sponge structure ensures even application. Includes 4 pieces.

Direction

Apply wax etc. to sponge, and apply to tyre evenly. Keep wiping to spread the product around. After use, wash with pH-neutral detergent, rinse, squeeze out excess water, and dry before storage.

Contents - 2pcs

Features

The ultrafine, yet stiff brush makes it easy to remove dirt from the detailed surface of tyre walls.
A double layer of 70,000 brush hairs, each half the width of a human hair, easily work into the fine surface of the rubber, releasing and removing dirt. The easy-hold grip and flat surface make it suitable and comfortable for use on a wide-range of tyres.
The included finger guard protects against scratches when cleaning the lower part of the tyre.

Direction

Before use, remove all dust and dirt with water.

Ensure brush is fully wet before use.

Brush gently to preserve the fibre structure. Too much pressure will eventually damage the cleaning surface.

May be used with water, or with car shampoo. We recommend DiGloss Kamitoré Wheel & Tire Cleaner.

After use, wash with pH-neutral detergent, squeeze out excess water, and dry before storage.

How to make the finger guard:

1. Push the U shaped flap through the square hole.

2. Fold both layers twice to create a Π shape.

3. push the flap into the slit on the back of the sponge.

Ensure fingers do not project too far from the guard.

Do not allow the guard to contact other painted or plastic surfaces.

This guard does not guarantee full protection from injury. Always take care when working.

Contents - 1pc

Features

Stain Eraser for Natural Tanned Leather can remove dirt from leather products such as: shoes, bags, belts or jackets. It is as easy as if you were erasing words with an eraser. It does not require you to use water and cleanser, which does not leave any unwanted stains or spots. Includes convenient to carry protection case. If you bring it in your bag, you can use it easily wherever you are and whenever you want.

Natural Tanned Leather

Abrasive compounds are not included so there is no damage to the leather surface after unwanted residue is removed. The eraser shavings are splatter-proof and are very soft. We recommend you use this product specifically for white leather where dirt is easily visible.

This eraser is shaped with exclusive, extra fine fibers. It gently removes dirt from suede leather or velour which can easily be damaged.

Use only for intended purpose.

if dirt has soaked into the leather, it make not be possible to remove. depending on the condition of the leather, the type and the finish, results may vary. risk of discoloration and/or change in texture.

results may vary. before using, test on an inconspicuous area first. do not apply with excessive force. may cause damage.

Contents - 75ml

Features

Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Just by driving at 45 km/h or more, all the water will fly off the glass! Significantly reduces the stress and danger of driving in the rain, especially at night. Treating your glass is made easy with the built-in felt applicator.

Direction

*Note: Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.

3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel.