Products

Contents - 470ml

Features

Direction

1. Wash off any excess dirt beforehand if necessary.

2. Shake well and spray onto wet or dry tires.

3. Wait to dry before driving, or wipe away excess liquid with a cloth.

Contents - 180ml

Features

Product is a spray on mousse that helps reduce condensation on the windows in cold temperatures. All you need to do is spray on leave it for 3 mins and buff it off! The spray can comes in size of 180ml which is enough to last approximately 8-10 windscreen, durability is up to a month.

Directions

1. Clean glass surface prior to application

2. Make sure surface is dry prior to application, you can spray product directly to the glass or on a microfiber cloth

3. Spread evenly, the glass should be full of foam solution, let it on for 3-5 mins

4. Wipe off with another cloth! If necessary you can use paper towel to dry the area.

*Warning do not put near open flames, keep clear away from children

Contents - 200g

Features

This product is strictly manufactured and tested in Japan and has a high content of first grade Brazilian crystal white carnauba. Throughout manufacturing process it has been cool down naturally unlike conventional wax that cools down immediately with the help of machinery. Cosmetic grade included sponge. No compound is included and is suitable with all colours vehicles.

What comes in the box?

·       Retail packaging

·       Plastic toolkit which contains 3 purpose (Brush, opener and pick)

·       Cosmetic grade applicator sponge

·       Soft rubber bottom, prevent you scratching the car surface if you put in on top your car bodywork

Product is perfect for Show N Shine events!

Directions

1. Remove any dirt on the car bodywork with car shampoo.

2. Apply moderate amount of wax with the sponge included and spread it as even as possible.

3. Allow it to dry for at least 10-15minutes (conditions apply).

4. Use a car detailing grade microfiber cloth to wipe of residue, flip towel if necessary in between process.

*Note for best results:

• We recommend buffing off with SOFT99 ‘Wipe Cloth’.
  
  
• Clay bar after car wash and proper compound process is needed.
  
  
• Sponge is not necessary to be damp when applying wax.
  
  
• In colder weather, it is recommend to allow more time for the wax to cure on the bodywork.
  
  
• If wax caught in badges and tiny gaps, use the tool included (Pick and brush).
  
  
• Applying panel by panel is recommended.

Contents - 110ml

Features

BLACK BLACK creates a thick-film coating on tires and maximizes shine along with super durability. The non-sticky, hard coating prevents dirt from adhering, which helps your car maintain ideal conditions by simply washing. The coating lasts for more than 60 days, and this rubbing type does not splatter over other parts.

Directions

* Be sure to wear protective gloves.
* If the tire is very dirty, remove unwanted residue in advance.
* Do not use this product on wet tires.

1. Shake bottle well and put liquid on black side of included sponge.
Allow enough liquid to soak thoroughly into applicator sponge.

2. Apply to tire and spread evenly across the tire.

Apply repeatedly until desired level of gloss is achieved.

3. Allow coating to dry for approximately 5-10 minutes after applying.

* If liquid gets into unwanted parts, wipe it off immediately with a clean towel or SOFT99 Silicone Off (sold separately).

Contents - 40ml Base Cleaner, 8ml Coating Liquid, 4 x Special Sheets, 4 x Sponge

Features

Restoration for unpainted resin parts such as a bumper or around wipers. Included 'Liquid Binder' removes dirt marks from the surface of resin parts, and 'Hard Clear Coat', creating a Silicon-based thick hard film coating.

Directions

Dry completely.

2. Apply a small amount of “Liquid Binder” onto included sheet, then spread thinly and evenly.

3. Wipe off with clean side of sheet.

4. Detach one sponge, apply “Hard Clear Coat” onto black side of included sponge and spread evenly.

5. Do not touch or wet surface for 24 hours.

Contents - 1000ml

Features

For cut use a wool pad and foam pad to finish.

Contents - 170mL + Sponge 1pc

Features

Coated agent to prevent fabric seat from dirt and liquid. Just spray and spread with sponge, contain special fluorine (fusso) polymer creating a protective layer on top of your fabric seat. Protects from water based and oil stains as well! High abrasion resistance works approx 3 months*.

Directions

1. Wipe seat with damp towel and vacuum (Do not use any cleaning products).

2. Shake bottle well and turn trigger to on.

3. Spray from a distance of approximately 20cm away from fabric seat
Allow liquid to moisten desired area.

4. Use included sponge to spread liquid in dry area for even coverage.
Spray moderately about 12-15 times per seat.

6. Allow at least 4 hours to dry.

Features

Cutting • Polishing • Finishing

Abrasives for correcting and finishing automobile paint

Formulated for efficient correction (scratch removal), polishing, and high-gloss finishing of automobile paint. Suitable for machine polish only

Cutting Compound 300ml
Remove scratches, orange peel, and sandpaper marks with Cutting Compound
Wool buff pad @ 1800rpm

Polishing Compound 300ml
Remove marks from Cutting and bring to a gloss with Polishing CompoundSponge/Euro foam buff pad @ 1500rpm
(if sandpaper marks remain, use wool)

Finishing Compound 300ml
If desired, bring paintwork up to perfection with clear gloss then finish with Finishing Compound
Sponge/Euro 'finishing' foam buff pad @ 1300rpm

Excellent properties with results:

✔ Suitable for all types of automobile paint
✔ Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring
✔ New anti-clogging, low dust formula improves working conditions
✔ Can be used as a two- or three-step process, as needed
✔ Contain no silicone, gloss-enhancers, or any other unnecessary additives

Contents - 5000ml

Features

Powerful, pH-neutral, and compound-free, this high-powered shampoo lathers into a thick, creamy foam that just melts the dirt away. Professional size and packaging. Despite its powerful foaming ability, this product has been designed with ease of rinsing in mind. May be used on coated vehicles, diluted 1:50. Compatible with water- and air-driven foamers. 

Contents - 300ml

Features

Remove scratches, orange peel, and sandpaper marks with Cutting Compound

✔ Suitable for all types of automobile paint
✔ Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring
✔ New anti-clogging, low dust formula improves working conditions
✔ Can be used as a two- or three-step process, as needed
✔ Contain no silicone, gloss-enhancers, or any other unnecessary additives

Recommended Pad & Speed

Wool buff pad @ 1800rpm

Contents - 70 ml

Features

Quick and easy glossy tire shine! Applicator can adjust for tire shape and easy to apply. Can apply up to 3-4 vehicles. High gloss finish with durability up to 6 weeks!

Directions

1. Wash off sand or dust in advance and ensure tire is dry.

2. Shake bottle well.

3. Remove cap and squeeze bottle allowing liquid to soak sponge.

4. Attach sponge side to tire sidewall and spread evenly around tire.

5. Allow to dry for approximately 5-10 minutes.
No need to wipe off.

Contents - 1x Large Brush, 1x Small Brush

Features

Brushes designed for cleaning narrow and awkward parts of wheels, such as nut holes and around valves. Brush tip made from pig hair. Unlike artificial fibres, pig hair has excellent balance between liquid retention and spreading. Grip made from polypropylene.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Contents - 1x Wheel Cleaning Sponge

Features

Designed to make cleaning easy for both wide areas and tight spaces, the high quality construction of this wheel-cleaning sponge makes it both flexible and sturdy. Unique cellular construction removes dirt efficiently and ultrafine cut-pile microfibers loosen dirt without clogging. Durable inner sponge and innovative glue-free fixings retain elasticity - a long-lasting tool that maintains performance.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

If washing with water only, thoroughly wet the wheel before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Contents - 20ml

Features

Spot stain remover kit for fabric seat which is effective for removing stubborn stain. Three simple procedure "Wash"→"Rinse"→"Absorb" can remove stain using our exclusive liquid and HPVA sponge. Can remove up to 30 fifty cent coin size stain. * HPVA=Hexagonal Polyvinyl Alcohol

Directions

1. Soak sponge in water and squeeze allowing sponge to become moist.

2. Shake bottle well and apply 5 drops of liquid onto sponge.

3. Press and tap sponge on stained area.
Cleaning liquid will react with stain and loosen it from the fabric fibres.

4. Rinse sponge.

5. Remove stain from fabric seat by using hexagonal side of sponge to absorb. Rotate each side continuously.

6. Rinse sponge and use flat clean side to absorb remaining excess liquid.

Contents - 300ml

Features

If desired, bring paintwork up to perfection with clear gloss then finish with Finishing Compound

✔ Suitable for all types of automobile paint
✔ Contain no silicone, gloss-enhancers, or any other unnecessary additives

Recommended Pad & Speed

Sponge/Euro 'finishing' foam buff pad @ 1300rpm

Contents - 10 Sheets

Features

Dead bugs, bird droppings and tree sap can cause damage to car paint. Not with FUKUPIKA Bugs& Droppings Removal, simply just wiping, removes and completely cleans the car's surface. Compared with conventional cleaning wipes, this wipe makes it possible give the car a nice clean surface finish,without leaving behind any white residue. The products does not contain any petroleum solvent, making FUKUPIKA absolutely eco-friendly!

Directions

1. Take out one sheet from package.

2. Do not rub with excessive force. If removing heavy dirt, wipe and allow cleaner to penetrate dirt, then gently wipe area. Results may vary depending on the contamination and adhesion of dirt.

3. When removing mud, sand, and dust, wipe off surface lightly and finish with a cleaner side of wipe.
* If white residue of cleaner remains on surface, wipe off with a clean wet towel.

4. If whole sheet gets dirty or dry, use another sheet.
* Seal package firmly, in order to prevent sheets from drying out.

Contents - 500ml

Features

Gel type spray glass cleaner lets you clean the glass easily without any liquid or water droplets leaving residue. The cleaning components are held in the gel, giving time to penetrate dirt and increase the effectiveness of cleaning stubborn dirt, such as bird droppings. Also suitable for use on mirrors, unpainted plastic, and rubber parts.

Directions

1. Turn the spray nozzle to “ON”.

2. Without shaking, spray onto the glass surface from 15 – 20cm away, then immediately wipe around the glass with a clean, dry towel.

3. Wipe up the dirt, changing to a fresh surface of the towel when necessary.

*If some residue remains on the glass, wipe again with a clean towel.

Contents - 400ml

Features

Just spray and wipe to freshen up your vehicle’s bodywork, removing light dust and dirt while applying a glossy and hydrophobic hybrid coating.

Directions

1. Shake the bottle well before use.

2. Turn nozzle to on and allow 1 spray for every 30cm square area on dry paintwork, wipe off with clean dry towel immediately.

When spraying directly to microfiber towel, spray twice than usual amount and work into paintwork

* If heavily soiled, wash off dirt and wipe off water otherwise it may cause unevenness or streak mark.

* Change the towel surface when it gets dirty.

Contents - 12 Sheets (350mm x 300mm)

Features

✔ QUICK EASY CLEAN & WAX CAR
✔ NO RINSING OR DRYING REQUIRED
✔ WATER REPELLENCY UP TO 1 MONTH
✔ CAN BE USE ON CERAMIC COATED VEHICLES

Triple-layer sheet for easy washing and waxing. Central layer designed for absorbing dirt to keep the outer layers clean. Helps prevent scratches and supports the structure of the  outer layers to glide lightly and effortlessly over your vehicle. Leaves your car clean, shiny and with water repellency up to 1 months.

Directions

1. Open the front flap, and pull out one wipe.

2. Fold the sheet into quarters and lightly wipe down the body of the vehicle.  Keep refolding the wipe to expose fresh surfaces and avoid spreading any dirt.

3. In particularly dirty areas, gently wipe off the dirt, then with a fresh surface of the sheet wipe of again.

4. If the entire wipe is dirty or becomes dried out, please use a fresh sheet.

5. Discard wipes after use.

NOTE: CLOSE AFTER USE TO KEEP WIPES MOIST.

Contents - 200g

Features

Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

✔️ Coats up to 40 vehicles!

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.

3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.

Contents - 200g

Features

Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

✔️ Coats up to 40 vehicles!

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.

3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.

Contents - 300ml

Features

Fusso Coat F7 is a liquid sealant based on Fusso fluorine polymers. Product creates a shiny, super hydrophobic coat on the car’s body. Included applicator gives an even and smooth application. F7 is a perfect alternative for those who live in a hurry but still want to have unparalleled paint protection. Product is durable for up to 7 months with regular maintenance.

Directions

1. Prepare vehicle by washing thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, cleaner or silicone off.

2. Apply a small amount of product onto included sponge.

3. Spread product thinly and evenly, panel by panel, with cross movements.

4. Wait for sealant to dry on surface, until white residue becomes visible.

5. Polish residue with a dry and clean microfiber cloth.
*For best results we recommend bu ffing off with SOFT99 ‘Wipe Cloth’

Contents - 250ml

Features

Another product from the renowned Fusso family! You can feel safe about your car paint for up to 9 months after applying this product, hard polymer formed creating a protective, shiny and water-repellent shield! Improved gloss components will enable you to achieve even deeper shine on your car’s body. Mirror Shine is one of the quickest paint protection to apply - you apply it straight onto the paint with the included microfiber cloth, the effects are immediate! Available in two tones variation to produce best results depending on your vehicles paint colour.

Directions

1. Prepare vehicle by washing it thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, a cleaner or other products.

2. Apply product onto included microfiber cloth.

3. Polish liquid firmly onto surface, panel by panel and you’re done!

Contents - 250ml

Features

Another product from the renowned Fusso family! You can feel safe about your car paint for up to 9 months after applying this product, hard polymer formed creating a protective, shiny and water-repellent shield! Improved gloss components will enable you to achieve even deeper shine on your car’s body. Mirror Shine is one of the quickest paint protection to apply - you apply it straight onto the paint with the included microfiber cloth, the effects are immediate! Available in two tones variation to produce best results depending on your vehicles paint colour.

Directions

1. Prepare vehicle by washing it thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, a cleaner or other products.

2. Apply product onto included microfiber cloth.

3. Polish liquid firmly onto surface, panel by panel and you’re done!

Contents - 500 ml

Features

Just spray and wipe to freshen up your vehicle’s bodywork, removing light dust and dirt while applying a highly durable Fusso coating, cleaning and coating in one step! The wax coating is reinforced with fluoro polymers to enhance and extend hydrophobicity for up to 180 days. Perfect for maintaining Fusso Coat. Contents will treat 5 mid-size vehicles.

Directions

* Before applying dirty vehicle, be sure to wash dirt off and dry to avoid scratches.

In cases of staining, use specialised cleaners 'Silicone Off'.

1. Shake well and switch nozzle to ON.

2. Spray surface of vehicle, 1 spray for every 30cm² area.

3. Without allowing to dry, lightly wipe across the surface with a clean, dry towel.

Refold the towel to expose a fresh surface when wiping becomes difficult.

Contents - 70 ml

Features

Formulated to coat polycarbonate plastic and glass, such as headlight covers, side visors, tail lamp covers, helmet shields and goggles. Specially designed curved applicator and included microfiber cloth for ease of application. Repels water under air pressure when driving. If you are a motorcycle or race car enthusiast, this product sure is suited for your needs!

Directions

1. Prepare the surfaces by washing and decontaminating.

2. Take off the cap and apply directly with felt applicator.

3. Apply gently ensuring full coverage.

4. Immediately wipe off with included towel.

*No need to wait for drying. Wipe off immediately before liquid gets dry.

Contents - 100ml

Features

Combining the abrasive powder of small, hard particles and big, soft particles, Glaco Glass Compound Roll-On is able to remove the toughest stains made from oily dirt and fluorine film. By just applying the product lightly onto the glass you will see immediate results as the roll-on removes the oil-film with ease. This convenient product can be used as surface preparation just before applying any coating to the glass.

Directions

1. Remove dust and dirt from glass with water, wipe off any water drops remaining on surface.

2. Shake bottle well with cap on and remove plastic seal.

3. Squeeze handle part of bottle to release compound liquid.

4.Polish onto glass until surface stops repelling liquid.

5. Wait for compound to dry, then wash glass clean with water to make a slurry and wipe off.

6. Remove polishing pad from applicator, then wash and dry for future use.

Contents - 40 ml

Features

Repellent prevents water from remaining on the surface by lining the mirror with super-fine, microscopic studs. Spray creates an even coating and shortens the process. Suitable for reverse surfaces such as mirrors and reverse cameras.

Directions

* Clean side mirror/ reverse camera with car shampoo or 'Glaco Compound Roll On'

1. Spray evenly onto surface from a distance of approximately 15cm.
We recommend putting a towel around the mirror while spraying, in order to prevent fluid getting on other parts

2. Allow to dry completely (in the summer for 1 hour, in the winter for 2 hours)

*Do not touch surface when dry.

Contents - 80ml Bottle, 1 x Pad

Features

Newly formulated triple-abrasive particles easily removes scaly spots which conventional compound cleaners cannot. Removes fluorine and sticky oil-film deposits. Restores car's glass close to original transparency. Special application pad is included.

Directions

1. Remove dust and dirt from glass with water, dry off any water remaining on surface.

2. Shake bottle well.

3. Pour liquid onto white side of included pad, begin to polish surface of glass.

4. Finally, wash glass cleanly with water.

Applications

Contents - 100ml, 2x Applicator Pad, 2x Microfiber Towel

Features - 2 Years Durability Hydrophilic Coating

H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion

FIELD TEST RESULTS

Drainage Performance Test – Water on hood receding

Less Frequent Visit to Car Wash

3 Months  Outside Exposure Test comparison to generic body glass coating

 
VENDING MACHINE (6 MONTHS AFTER APPLICATION)

MARINE BOAT (12 MONTHS AFTER APPLICATION)

OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)

 
Directions

1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.

2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.

3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).

4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.

5. After coating, leave to cure in a dry place for 12 hours.

CAUTION!!!