Products

Contents - 1000 ml

Features

High performance pH neutral shampoo removes stubborn dirt in a flash. Will not attract dirt even if the soap dries up during wash. Powerful wash that regains paint clarity. Ultra-fine cleaner particles clean without damaging the paint. Removes minor water spots in one wash.

Direction

1. Remove sand and dust from car with water.

2. Shake bottle well with cap on.

3. Pour 1 or 2 coin size drops of shampoo directly onto a damp sponge, create lather by rubbing sponge.

4. Clean vehicle with sponge.

5. Rinse well with water until all bubbles are gone.

6. Wipe off all water drops remaining on surface with a clean or absorption towel.
If water drops remain on surface, it may cause spots or stains.

Contents - 400ml

Features

This non-abrasive deep clean can dissolve unsightly residues on wheels. The foam is easy to apply, and does not drip off, allowing the chemical components to work on loosening and lifting the dirt. The included sponge makes it easy to agitate dirt out from tight spaces. Suitable for aluminium and steel wheels.

Direction

1. First use water to remove what dust and dirt can be rinsed away.

2. Shake well and spray over the entire wheel. If the trigger is l℃ked, turn the nozzle to open.

3. Let sit for 2-3 minutes, and then agitate with the provided sponge to lift dirt from the wheel surface.

4. Rinse thoroughly with water to remove all cleaner and dirt.

5. Wipe off remaining water.

6. Check brakes at low speed before driving.

Contents - 400 ml + 1x Brush

Features

Not only cleans fabric seat but also gets rid of bad odours. Antibacterial effect prevents moulds or ticks from occurring, leaving a fresh mint scent behind. Can easily remove dirt, tar, stains or sebum from fabric seats. Included brush used for agitation to remove dirt in fabric. Organic solvent is NOT included, so it is very friendly to people and fabrics.

Direction

1. Turn nozzle to <MIST>.

2. Spray from a distance of approximately 15-20cm from fabric seats or mats.

3. Use included brush to agitate, area sprayed will bubble.

4. Wipe off the bubble and dirt with a clean towel before surface gets dry.

5. Allow to dry completely after cleaning.

Contents - 420 ml

Features

Just spray on and wipe off to remove dead bugs, tar, and other oily dirt. It really is that so simple! It also creates a temporary anti-fouling coating to prevent adhesion of dirt.

Direction

* Use on a washed and dried vehicle.

1. Spray on the dirty area from a distance of 20-30 cm.

2. Wipe off with a dry towel.

Contents - 220 ml

Features

Fabric seat deodoriser directly attacks and neutralises smells trapped in fabric seats, effectively removing smells when conventional products would fail. Newly developed direct injection mechanism allows the deodorising and anti-bacterial compounds to penetrate directly into the inner structure of the cushioning to attack those stubborn smells coming from sweat, pets, tobacco and etc.

Direction

*Wipe down seat completely with a wrung-out damp towel.

1. Shake well and unlock nozzle.

2. Press direct injection nozzle directly into fabric seat, spacing injections by around 30cm. Use 1-2 sprays for headrest, 4-6 for front seat or backrest. Each injection should be around 1 second.

3. Using spray lever, spray entire seat surface from a distance of approximately 20 cm.

4. After spraying, wipe down seat with dry towel, leave to dry completely
(Allow at least 4 hours in summer and 12 hours in winter).

Contents - 40ml Base Cleaner, 8ml Coating Liquid, 4 x Special Sheets, 4 x Sponge

Features

Restoration for unpainted resin parts such as a bumper or around wipers. Included 'Liquid Binder' removes dirt marks from the surface of resin parts, and 'Hard Clear Coat', creating a Silicon-based thick hard film coating.

Direction

1. Remove dirt, oil and any other unwanted residues from surface.

Dry completely.

2. Apply a small amount of “Liquid Binder” onto included sheet, then spread thinly and evenly.

3. Wipe off with clean side of sheet.

4. Detach one sponge, apply “Hard Clear Coat” onto black side of included sponge and spread evenly.

5. Do not touch or wet surface for 24 hours.

Contents - 300ml

Features

Remove marks from Cutting and bring to a gloss with Polishing Compound

✔ Suitable for all types of automobile paint
✔ Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring
✔ New anti-clogging, low dust formula improves working conditions
✔ Can be used as a two- or three-step process, as needed
✔ Contain no silicone, gloss-enhancers, or any other unnecessary additives

Recommended Pad & Speed

Sponge/Euro foam buff pad @ 1500rpm
(if sandpaper marks remain, use wool)

Contents - 750ml

Features

A combination of pH-neutral surfactant and mild cleansing powder removes stubborn dirt and water marks from ceramic-coated vehicles, without damaging the coating itself. This product is compatible with all colours.

Direction

1. Rinse off dust and sand with water.

2. Shake well and open the shampoo, apply generously to the included sponge, and wash the vehicle.

3. Rinse thoroughly and remove leftover water droplets with a towel or cloth.

Contents - 1800ml

Features

Direction

* Wash the vehicle before application.

1. Spray onto the wet car body.

2. Wipe dry with an absorbent cloth that has been dampened and wrung out.

* If it becomes uneven, wet the body and treat again.

Contents - 400ml

Features

Direction

* Wash the vehicle before application.

1. Spray onto the wet car body.

2. Wipe dry with an absorbent cloth that has been dampened and wrung out.

* If it becomes uneven, wet the body and treat again.

Contents - 4L

Features

Contents - 4L

Features

Contents - 360ml

Features

Contents - 100ml

Features

Pure House: Liquid

Pure House emits high class scent, which allows you to feel comfortable while driving. You can also enjoy the well-designed stylish bottle.

Direction

1. Remove the cap and take out white inner seal.

2. Insert included wick toward the bottom and put cap back onto container.

* Adjust scent strength by turning the lid.

Contents - 100ml

Features

Pure House: Liquid

Pure House emits high class scent, which allows you to feel comfortable while driving. You can also enjoy the well-designed stylish bottle.

Direction

1. Remove the cap and take out white inner seal.

2. Insert included wick toward the bottom and put cap back onto container.

* Adjust scent strength by turning the lid.

Contents - 100ml

Features

Pure House: Liquid

Pure House emits high class scent, which allows you to feel comfortable while driving. You can also enjoy the well-designed stylish bottle.

Direction

1. Remove the cap and take out white inner seal.

2. Insert included wick toward the bottom and put cap back onto container.

* Adjust scent strength by turning the lid.

Contents - 300ml

Features

Rain Drop coating is formulated to apply onto the entire surface of car body, glass, plastic and chrome. The bazooka trigger spray design allows super-fast product application. Coating protects paint up to 3 months and glass 2 months.

Direction

1. Before use, shake can up and down about 20 times.

2. Wash vehicle to remove any dirt and dust.
No need to completely dry vehicle, can apply product on wet surface.

3. Spray onto wet body/ glass, 1 second will cover about 1m² area.

4. After spraying, immediately spread and wipe foam around surface with a microfiber or cotton towel. Wring out towel regularly.

5. Leave to dry completely for about 5 minutes in hot conditions and 20-30 minutes in winter

!warning: do not turn the tab

if tab is turned it will release the propellant making product redundant.

tab is designed for safe disposal of spray can.

only turn tab in the upward direction when product is completely used or emptied.

this will allow for the release of propellant from the can to be safely disposed of.

Contents - 180 ml + Microfiber towel

Features

Cleaner design for glass/ceramic coating contains only mild cleaning ingredients. Restoring brightness of coated vehicle body. Symptoms such as water spots, small scratches on door knobs can be easily removed!

Direction

1. Wash off dirt, dust or mud, and wipe off water.

2. Shake bottle well.

3. Pour a coin size amount of  liquid onto included towel.

4. Rub towel onto surface one panel at a time on affected areas.

Contents - Abrasive 80ml, Ultrafine pad L ×1, Ultrafine pad S ×1, Compound Sponge ×1

Features

The high-gloss black plastic known as piano black shows scratches very easily, and can show age much more quickly than paint or other areas of the vehicle. This kit makes it easy to restore painted and unpainted piano black and other high-gloss plastics by hand, refining them to a near new condition.

Direction

Note: Be sure to thoroughly clean and thoroughly dry the area to be treated, and mask off neighbouring areas. Use a scratch removal compound (sold separately) with the compound sponge to remove any deep scratches beforehand.

1. With the cap closed, shake the bottle well.

2. Choose an ultrafine pad size appropriate or comfortable. Apply a moderate amount of compound to the black surface of the pad. Polish the surface while spreading the liquid in horizontal and vertical motions. Aim work on one 30&times;30 cm area at a time.

3. After polishing, remove any masking and wipe up any residue with a soft, clean towel.

Contents - 1pc

Features

Contents - 1pc

Features

Compact and easy-to-use, this plastic glosser can freshen up an interior in an instant, and stows away easily thanks to its convenient size. Just rub to restore gloss, hide scratches, and deepen darkness of interior plastic. No-spray construction eliminates splashes and drips - easy pinpoint application.

Direction

Clear surface to treated prior to application

1. Open the cap, and apply to surface with a light pressure.

In the event of unevenness, wipe with a soft, clean towel.

Close cap after use.

Contents - 1x Duster

Features

Microfiber dusters have a luxurious feel, and are quick and effective at removing dust from interior surfaces. Their attractive appearance enhances interior atmosphere, and do not look out-of-place in luxury vehicles.

Direction

Contents - 80ml

Features

Easily remove dirt and stains from automobile leather with the easy-grip bottle and integrated applicator. The MVB (Microvelvet Brush) uses ultrafine fibres to work in the grain of the leather to properly remove contamination without damaging the surface. Specialised surfactants remove stains including from denim, etc. While also containing the leather-conditioning carnauba wax, a non-slip effect has also been achieved. Also suitable for PVC and urethane synthetic leathers.

Direction

Note: Before use, test on an inconspicuous area.

1. Grip firmly and open cap.

2. Squeeze the bottle regularly to release liquid, and spread around the surface, while gently scrubbing.

3. Wipe up with a dry towel.

Note: to release more liquid, squeeze the bottle with the brush face down towards the seat, or for vertical surfaces, with the narrow end pointed downwards.

Contents - 1x Coating Agent bottle (15mL), 2x Hard Sponge, 2x Soft Sponge, 3x Silicone off Wipes Sheets, 2x Gloves

Features

Bring the life back to faded plastic and rubber trim! This treatment restores the deep darkness, natural gloss, and rich texture of black trim to revitalize your vehicle. The unique coating liquid penetrates into the surface and polymerizes to form a flexible yet glossy surface, making it suitable for restoring both hard plastic and soft rubber!

Direction

Note: Apply only to clean, dry, unpainted plastic and rubber.

1. First clean and degrease the area to be treated using the included ‘Silicone Off’ degreasing sheets.

Note: Some textured plastics may pick up fibers from the sheet. Remove these before proceeding. To prevent the sheets from drying out, firmly seal the package between uses.

2. Cut sponge to suitable size for area to be treated. The black sponge is for hard plastic, the white sponge is for soft rubber. Apply a small amount of the liquid (green label), and spread thinly and evenly across the surface to be treated.

Note: Some rubber parts may absorb the liquid. Keep applying until enough liquid remains.

3. After drying for around 5 minutes, use a fresh sheet to lightly wipe up the surface for an even finish. If left for too long, the excess will not be possible to remove.

Note: Do not touch or wet for 24 hours. Do not reuse sponges that have hardened. If the liquid unintentionally comes into contact with another surface, wipe off immediately.

Contents - 750ml

Features

Neutral shampoo which doesn’t damage your car's coated surface. Formulated for maintaining professional or wax-coated vehicles. Included sponge will create bubbles and lather. Product contains NO synthetic cleaning components and abrasive compounds. Natural ingredient, eco-friendly and compatible with ALL colours.

Direction

1. Remove dust and dirt with water.

2. Dilute the liquid 1 cap/ 1L water and apply to included sponge.

3. Wash car gently with sufficient bubbles.

4. Rinse and wipe off remaining water drops with a clean towel.

Contents - 300 ml

Features

Replaces IPA wipe down. Essential for surface preparation prior to applying wax or ceramic and glass coating, it will improve the adhesion of the coating to the vehicles surface. The aerosol design allows minimum product usage while spreading to a large area!

✔ Oil, Polish residue and fillers remover
✔ Prep item before applying wax / coating
✔ Replaces IPA wipe down
✔ Improves the adhesion of the surface protective coating
✔ Safe for paint 

Direction

1. Shake bottle well

2. Spray on desired panel and wipe dry with a dry detailing microfiber cloth

3. Expose new clean areas of the towel to avoid smearing the collected wax, oil or compound back onto the vehicle.

Contents - 2x 50g Clay Bar

Features

SMOOTH EGG Clay Bar gently removes iron powders and deposits from glass/ ceramic coatings.

Direction

1. Wash car, removing sand and dust from the body of vehicle.

2. Knead clay bar by hand until it's soft and flat.

3. Gently slide clay bar over wet surface. * Be sure to knead the bar regularly to expose fresh clay.

Note: Always let the clay bar do the work never add pressure on the surface.
Always lubricate with water or shampoo water when using clay bar on surface.

Contents - 230ml + 1 Wipe Cloth

Features

Our newly developed quick coat not only gives your vehicle water-repellent Hydropolymer layer, but prevents water stains with its unique Hydropeeling technology. When a vehicle coated with Smooth Egg Hydro Flash is wet with rain, the residue that would normally result in a stain is carried away along with a small amount of the polymer. This is seriously strong protection. By including a specially formulated levelling agent, we are able to keep our Hydropolymer evenly adhered to your vehicle… and that keeps your car shining beautifully, with a gloss that withstands the elements. This product is suitable for use on wet or dry coated and uncoated vehicles, and may be used on all exterior and interior parts except upholstery. One bottle treats a medium-sized vehicle eight times.

Direction

Note: Before applying Smooth Egg Hydro Flash, be sure to wash your vehicle.

Drying is optional.

1. Shake well, remove the trigger lock, and spray onto the body, 1 spray for every 30cm² on dry car body, if car body is wet 1 spray for every 15cm² area

2. Wipe off quickly with the included cloth.

Work on a small area at a time.

Contents - 200ml

Features

Formulated ""Repair Coat"" repairs damaged professional body glass coating, and restores water repellent effect. Just spray on wet body of vehicle after car wash, wipe down surface and you're done!  Coating will form a water repellent layer leaving the surface feeling smooth as a peeled boiled egg. Can be used on vehicles without ceramic/ glass coating. Feel free to use on wheels, windows, headlights, tail lamps, plastic parts, vehicle interior, etc. Compatible with any colour vehicle paint.

Direction

1. Remove dust and dirt with water.
For best results, use 'SMOOTH EGG Shampoo for Repair'.
Do not dry vehicle completely after washing.

2. Spray liquid on wet body of vehicle.
* Apply roughly one spray per 30 cm².

3. Fold included cloth into quarters and wipe down the body of vehicle, wring the cloth to dry as needed.

Contents - 500ml

Features

A pH neutral shampoo best dedicated for maintaining cars with professional coatings, can be used as a standalone maintenance product. Shampoo causes water to glide off when the car is being rinsed, leaving less water drops behind meaning less drying time. The shampoo produces best results if used in conjunction with other products from the SMOOTH EGG series.

Direction

1. Rinse car with water, remove dust and heavy dirt in order to prevent scratching paint.

2. Pour shampoo into bucket or apply squirt directly onto a sponge, create lather, then wash whole vehicle.

3. Rinse vehicle with water and dry using microfiber towel.

Contents - 230 ml

Features

Smooth Egg platinum is our top of the range spray sealant. It contains 4 different types of resins, resulting in a wet look, hydrophobic surface and leaving a slick finish on the bodywork. Durability of product will last up to 3 months. Can be applied when vehicle body is still wet after maintenance wash.

Direction

1. Remove any dirt on car bodywork with car shampoo.

2. Rinse off with water.

3. Detach trigger and spray onto wet car body.
* 2 Spray will cover an area of 50cm².

4. Wipe off immediately with included towel.

Contents - 1 Sheet (360x360mm)

Features

SMOOTH EGG Smooth Cloth is a microfiber towel which is made with the highest level of Japanese technology at every stage of the process, including the making of an original yarn, knitting, cutting, and sewing. It achieves low friction, works smoothly, excellent water absorption, water retention, and evaporation ability.

Direction

1. Wipe down surface, squeeze cloth dry as needed.

* Wash cloth with tap water and dry thoroughly before storing it.

* If cloth gets dirty, wash with a neutral detergent.

Do not use a bleach and fabric softener.