Products

Contents - 470ml

Features

Direction

1. Wash off any excess dirt beforehand if necessary.

2. Shake well and spray onto wet or dry tires.

3. Wait to dry before driving, or wipe away excess liquid with a cloth.

Contents - 200g

Features

This product is strictly manufactured and tested in Japan and has a high content of first grade Brazilian crystal white carnauba. Throughout manufacturing process it has been cool down naturally unlike conventional wax that cools down immediately with the help of machinery. Cosmetic grade included sponge. No compound is included and is suitable with all colours vehicles.

What comes in the box?

• Retail packaging
• Plastic toolkit which contains 3 purpose (Brush, opener and pick)
• Cosmetic grade applicator sponge
• Soft rubber bottom, prevent you scratching the car surface if you put in on top your car bodywork

Product is perfect for Show N Shine events!

Direction

1. Remove any dirt on the car bodywork with car shampoo.

2. Apply moderate amount of wax with the sponge included and spread it as even as possible.

3. Allow it to dry for at least 10-15minutes (conditions apply).

4. Use a car detailing grade microfiber cloth to wipe of residue, flip towel if necessary in between process.

*Note for best results:

• We recommend buffing off with SOFT99 ‘Wipe Cloth’.
  
• Clay bar after car wash and proper compound process is needed.
  
• Sponge is not necessary to be damp when applying wax.
  
• In colder weather, it is recommend to allow more time for the wax to cure on the bodywork.
  
• If wax caught in badges and tiny gaps, use the tool included pick and brush.
  
• Applying panel by panel is recommended.

Contents - 1000ml

Features

For cut use a wool pad and foam pad to finish.

Contents - 170mL + Sponge 1pc

Features

Coated agent to prevent fabric seat from dirt and liquid. Just spray and spread with sponge, contain special fluorine (fusso) polymer creating a protective layer on top of your fabric seat. Protects from water based and oil stains as well! High abrasion resistance works approx 3 months*.

Direction

1. Wipe seat with damp towel and vacuum (Do not use any cleaning products).

2. Shake bottle well and turn trigger to on.

3. Spray from a distance of approximately 20cm away from fabric seat
Allow liquid to moisten desired area.

4. Use included sponge to spread liquid in dry area for even coverage.
Spray moderately about 12-15 times per seat.

6. Allow at least 4 hours to dry.

Features

Cutting • Polishing • Finishing

Abrasives for correcting and finishing automobile paint

Formulated for efficient correction (scratch removal), polishing, and high-gloss finishing of automobile paint. Suitable for machine polish only

Cutting Compound 300ml
Remove scratches, orange peel, and sandpaper marks with Cutting Compound
Wool buff pad @ 1800rpm

Polishing Compound 300ml
Remove marks from Cutting and bring to a gloss with Polishing CompoundSponge/Euro foam buff pad @ 1500rpm
(if sandpaper marks remain, use wool)

Finishing Compound 300ml
If desired, bring paintwork up to perfection with clear gloss then finish with Finishing Compound
Sponge/Euro 'finishing' foam buff pad @ 1300rpm

Excellent properties with results:

•  Suitable for all types of automobile paint
• Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring
• New anti-clogging, low dust formula improves working conditions
• Can be used as a two- or three-step process, as needed
•  Contain no silicone, gloss-enhancers, or any other unnecessary additives

Contents - 5000ml

Features

Powerful, pH-neutral, and compound-free, this high-powered shampoo lathers into a thick, creamy foam that just melts the dirt away. Professional size and packaging. Despite its powerful foaming ability, this product has been designed with ease of rinsing in mind. May be used on coated vehicles, diluted 1:50. Compatible with water- and air-driven foamers. 

Contents - 300ml

Features

Remove scratches, orange peel, and sandpaper marks with Cutting Compound

• Suitable for all types of automobile paint
• Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring
• New anti-clogging, low dust formula improves working conditions
• Can be used as a two- or three-step process, as needed
• Contain no silicone, gloss-enhancers, or any other unnecessary additives

Recommended Pad & Speed

Wool buff pad @ 1800rpm

Contents - 200ml

Features 

Carbon black and blackshine carnauba combine to create beautiful, natural black sheen for tyres. With a sleek black look, this tyre wax protects tyres from fading or browning due to UV, dirt, etc. Excellent water-resistance ensures the effect lasts for at least 2 months, without the use of hydrocarbon solvents. The wax-based formula guarantees no sliminess or slinging. Includes two 'Pitasupo' tyre sponges, for easy application.

Direction

Note: Shake well before opening. Use included gloves. Do not use on wet tyres. When particularly dirty, was tyres first with water, and dry before use.

1. Remove cap, apply 3 lines of liquid across the sponge surface.

2. To prevent dripping, start from the bottom of the tyre, and apply evenly to the whole.

3. After application, dry for at least 10-20 minutes, depending on temperature.

Note: To avoid slinging onto the body etc., do not drive until fully dry. Depending on the condition of the tyre, some unevenness may occur. In that event, allow to dry, and apply more liquid to create an even appearance. DiGloss Pitasupo Tire Sponge is also available for purchase separately. To increase gloss, polish gently with a cloth after drying.

Contents - 70 ml

Features

Quick and easy glossy tire shine! Applicator can adjust for tire shape and easy to apply. Can apply up to 3-4 vehicles. High gloss finish with durability up to 6 weeks!

Direction

1. Wash off sand or dust in advance and ensure tire is dry.

2. Shake bottle well.

3. Remove cap and squeeze bottle allowing liquid to soak sponge.

4. Attach sponge side to tire sidewall and spread evenly around tire.

5. Allow to dry for approximately 5-10 minutes.
No need to wipe off.

Contents - 1x Large Brush, 1x Small Brush

Features

Brushes designed for cleaning narrow and awkward parts of wheels, such as nut holes and around valves. Brush tip made from pig hair. Unlike artificial fibres, pig hair has excellent balance between liquid retention and spreading. Grip made from polypropylene.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Contents - 1x Wheel Cleaning Sponge

Features

Designed to make cleaning easy for both wide areas and tight spaces, the high quality construction of this wheel-cleaning sponge makes it both flexible and sturdy. Unique cellular construction removes dirt efficiently and ultrafine cut-pile microfibers loosen dirt without clogging. Durable inner sponge and innovative glue-free fixings retain elasticity - a long-lasting tool that maintains performance.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

If washing with water only, thoroughly wet the wheel before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Contents - 2pcs

Features

The ultrafine, yet stiff brush makes it easy to remove dirt from the detailed surface of tyre walls.
A double layer of 70,000 brush hairs, each half the width of a human hair, easily work into the fine surface of the rubber, releasing and removing dirt. The easy-hold grip and flat surface make it suitable and comfortable for use on a wide-range of tyres.
The included finger guard protects against scratches when cleaning the lower part of the tyre.

Direction

Before use, remove all dust and dirt with water.

Ensure brush is fully wet before use.

Brush gently to preserve the fibre structure. Too much pressure will eventually damage the cleaning surface.

May be used with water, or with car shampoo. We recommend DiGloss Kamitoré Wheel & Tire Cleaner.

After use, wash with pH-neutral detergent, squeeze out excess water, and dry before storage.

How to make the finger guard:

1. Push the U shaped flap through the square hole.

2. Fold both layers twice to create a Π shape.

3. push the flap into the slit on the back of the sponge.

Ensure fingers do not project too far from the guard.

Do not allow the guard to contact other painted or plastic surfaces.

This guard does not guarantee full protection from injury. Always take care when working.

Contents - 800ml

Features

Brown staining on wheels and tyres really ruins the whole look of a vehicle. This newly-developed spray reacts
with contaminants, even when embedded in the rubber, dissolving them to make it easy to simply rinse away the
dirt. The sophisticated formula is gentle to wheel and tyre, but extremely powerful against oily grime and tar. Specialised grip makes for easy use, with generous contents that can treat approx. 20 wheels and tires.

Direction

1. Rinse surface with water to remove any dust or dirt.

2. Set nozzle to the ON position, and spray over entire surface without opening the white flap. Use around 40 shots for an average wheel.

3. Wait around 30 seconds for reaction, before scrubbing with a brush.

4. Ensure to rinse thoroughly with water, and dry with a towel. Failure to remove all product may damage surfaces.

5. Rinse nozzle with water after use.

Note: Test brakes at low speed after use. We recommend DiGloss Kamitoré series for effective tyre-cleaning tools. After use, protect your tyres with DiGloss Black Devil Tire Wax!

Contents - 4pcs

Features

A specialised sponge for tyres, which removes the need to move the vehicle for a complete application.
The fine edge allows application of tyre waxes etc. right up to the edge of the rubber, without getting the wheel dirty.
The V-cut grip prevents slipping, and the urethane sponge structure ensures even application. Includes 4 pieces.

Direction

Apply wax etc. to sponge, and apply to tyre evenly. Keep wiping to spread the product around. After use, wash with pH-neutral detergent, rinse, squeeze out excess water, and dry before storage.

Features

The Kiwami, which translates to Extreme Gloss, is a great product for those who desire perfect balance between glossy finish and protection. Extreme Gloss is very easy producing a strong beading effect. Making your car paint shiny and smooth as silk! Available in two tone variations to produce best results depending on your vehicle’s paint colour.

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.

3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

* Drying time may be longer in cold temperature.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.

Contents - 200g

Features

‘The Kiwami’ is a carefully crafted blend of the finest Carnauba wax, reinforced with our latest synthetic polymers. This blend is designed especially to bring a dazzling gloss and sparkle to the paintwork of your silver vehicle for up to 3 months. This is the ultimate wax for gloss. This is ‘The Kiwami’.

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.

3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

* Drying time may be longer in cold temperature.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.

Contents - 200g

Features

Direction

Note: Use only on specified colours. Apply to a washed and thoroughly dried car. In hot conditions, work panel-by-panel to avoid over-curing. Curing time may be longer in cold conditions.

1. Take a moderate amount of wax onto the included sponge, and spread it evenly over the body of the vehicle.

2. Increase pressure to remove stubborn dirt and stains.

3. After drying for between 5 and 15 minutes, buff off with a soft clean towel. Be sure to remove completely and promptly to avoid damaging the paintwork.

Contents - 20ml

Features

Spot stain remover kit for fabric seat which is effective for removing stubborn stain. Three simple procedure "Wash"→"Rinse"→"Absorb" can remove stain using our exclusive liquid and HPVA sponge. Can remove up to 30 fifty cent coin size stain. * HPVA=Hexagonal Polyvinyl Alcohol

Directions

1. Soak sponge in water and squeeze allowing sponge to become moist.

2. Shake bottle well and apply 5 drops of liquid onto sponge.

3. Press and tap sponge on stained area.
Cleaning liquid will react with stain and loosen it from the fabric fibres.

4. Rinse sponge.

5. Remove stain from fabric seat by using hexagonal side of sponge to absorb. Rotate each side continuously.

6. Rinse sponge and use flat clean side to absorb remaining excess liquid.

Contents - 300ml

Features

If desired, bring paintwork up to perfection with clear gloss then finish with Finishing Compound

✔ Suitable for all types of automobile paint
✔ Contain no silicone, gloss-enhancers, or any other unnecessary additives

Recommended Pad & Speed

Sponge/Euro 'finishing' foam buff pad @ 1300rpm

Contents - 10 Sheets

Features

Dead bugs, bird droppings and tree sap can cause damage to car paint. Not with FUKUPIKA Bugs& Droppings Removal, simply just wiping, removes and completely cleans the car's surface. Compared with conventional cleaning wipes, this wipe makes it possible give the car a nice clean surface finish,without leaving behind any white residue. The products does not contain any petroleum solvent, making FUKUPIKA absolutely eco-friendly!

Direction

1. Take out one sheet from package.

2. Do not rub with excessive force. If removing heavy dirt, wipe and allow cleaner to penetrate dirt, then gently wipe area. Results may vary depending on the contamination and adhesion of dirt.

3. When removing mud, sand, and dust, wipe off surface lightly and finish with a cleaner side of wipe.
* If white residue of cleaner remains on surface, wipe off with a clean wet towel.

4. If whole sheet gets dirty or dry, use another sheet.
* Seal package firmly, in order to prevent sheets from drying out.

Contents - 80ml

Features

Remove fog-causing dirt and leave a durable anti-fog coating to prevent fogging. Easy to use, cleaning and coating are completed in one step. Compatible with UV and IR blocking coatings!

Direction

1. Turn the spray nozzle to (ON).

2. Without shaking, spray onto the glass surface from 15-20 cm away, then immediately wipe around the glass with a clean, dry towel.

3. Wipe up the dirt, changing to a fresh surface of the towel when necessary. Finally wipe up with a dry surface.

* If some residue remains on the glass, wipe again with a clean towel.

Contents - 500ml

Features

Gel type spray glass cleaner lets you clean the glass easily without any liquid or water droplets leaving residue. The cleaning components are held in the gel, giving time to penetrate dirt and increase the effectiveness of cleaning stubborn dirt, such as bird droppings. Also suitable for use on mirrors, unpainted plastic, and rubber parts.

Direction

1. Turn the spray nozzle to “ON”.

2. Without shaking, spray onto the glass surface from 15 – 20cm away, then immediately wipe around the glass with a clean, dry towel.

3. Wipe up the dirt, changing to a fresh surface of the towel when necessary.

*If some residue remains on the glass, wipe again with a clean towel.

Contents - 400ml

Features

Just spray and wipe to freshen up your vehicle’s bodywork, removing light dust and dirt while applying a glossy and hydrophobic hybrid coating.

Direction

1. Shake the bottle well before use.

2. Turn nozzle to on and allow 1 spray for every 30cm square area on dry paintwork, wipe off with clean dry towel immediately.

When spraying directly to microfiber towel, spray twice than usual amount and work into paintwork

* If heavily soiled, wash off dirt and wipe off water otherwise it may cause unevenness or streak mark.

* Change the towel surface when it gets dirty.

Contents - 12 Sheets (350mm x 300mm)

Features

✔ QUICK EASY CLEAN & WAX CAR
✔ NO RINSING OR DRYING REQUIRED
✔ WATER REPELLENCY UP TO 1 MONTH
✔ CAN BE USE ON CERAMIC COATED VEHICLES

Triple-layer sheet for easy washing and waxing. Central layer designed for absorbing dirt to keep the outer layers clean. Helps prevent scratches and supports the structure of the  outer layers to glide lightly and effortlessly over your vehicle. Leaves your car clean, shiny and with water repellency up to 1 months.

Direction

1. Open the front flap, and pull out one wipe.

2. Fold the sheet into quarters and lightly wipe down the body of the vehicle.  Keep refolding the wipe to expose fresh surfaces and avoid spreading any dirt.

3. In particularly dirty areas, gently wipe off the dirt, then with a fresh surface of the sheet wipe of again.

4. If the entire wipe is dirty or becomes dried out, please use a fresh sheet.

5. Discard wipes after use.

NOTE: CLOSE AFTER USE TO KEEP WIPES MOIST.

Contents - 200g

Features

Direction

Note: To make wax application easier, wet the applicator before starting.

1. Thoroughly clean the car. Conduct a decontamination if necessary.

2. Apply a minimal amount of wax on the pad. Use the edge of the can if you pick up too much.

3. Spread a thin and even layer of wax over the paintwork in a criss-cross motion, working panel by panel.

4. Wait about 5-8 minutes for the wax to bind to the paintwork. The higher the temperature, the shorter the time.

5. Polish the residue with a clean and dry microfibre cloth. Change sides of the microfibre if necessary.

Note: Prolong the life of the wax by using cleaning agents with neutral pH and utilizing dedicated quick detailer spray, Fusso Coat Speed & Barrier, after each wash.

Contents - 200g

Features

Direction

Note: To make wax application easier, wet the applicator before starting.

1. Thoroughly clean the car. Conduct a decontamination if necessary.

2. Apply a minimal amount of wax on the pad. Use the edge of the can if you pick up too much.

3. Spread a thin and even layer of wax over the paintwork in a criss-cross motion, working panel by panel.

4. Wait about 5-8 minutes for the wax to bind to the paintwork. The higher the temperature, the shorter the time.

5. Polish the residue with a clean and dry microfibre cloth. Change sides of the microfibre if necessary.

Note: Prolong the life of the wax by using cleaning agents with neutral pH and utilizing dedicated quick detailer spray, Fusso Coat Speed & Barrier, after each wash.

Contents - 200g

Features

Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

✔️ Coats up to 40 vehicles!

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.

3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.

Contents - 200g

Features

Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

✔️ Coats up to 40 vehicles!

Direction

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.

3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.

Contents - 300ml

Features

Fusso Coat F7 is a liquid sealant based on Fusso fluorine polymers. Product creates a shiny, super hydrophobic coat on the car’s body. Included applicator gives an even and smooth application. F7 is a perfect alternative for those who live in a hurry but still want to have unparalleled paint protection. Product is durable for up to 7 months with regular maintenance.

Direction

1. Prepare vehicle by washing thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, cleaner or silicone off.

2. Apply a small amount of product onto included sponge.

3. Spread product thinly and evenly, panel by panel, with cross movements.

4. Wait for sealant to dry on surface, until white residue becomes visible.

5. Polish residue with a dry and clean microfiber cloth.
*For best results we recommend bu ffing off with SOFT99 ‘Wipe Cloth’

Contents - 250ml

Features

Another product from the renowned Fusso family! You can feel safe about your car paint for up to 9 months after applying this product, hard polymer formed creating a protective, shiny and water-repellent shield! Improved gloss components will enable you to achieve even deeper shine on your car’s body. Mirror Shine is one of the quickest paint protection to apply - you apply it straight onto the paint with the included microfiber cloth, the effects are immediate! Available in two tones variation to produce best results depending on your vehicles paint colour.

Directions

1. Prepare vehicle by washing it thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, a cleaner or other products.

2. Apply product onto included microfiber cloth.

3. Polish liquid firmly onto surface, panel by panel and you’re done!