Products

Contents - 500ml

Features

Just spray and wipe to freshen up your vehicle’s bodywork, removing light dust and dirt while applying a highly durable Fusso coating, cleaning and coating in one step! The wax coating is reinforced with fluoro polymers to enhance and extend hydrophobicity for up to 180 days. Perfect for maintaining Fusso Coat. Contents will treat 5 mid-size vehicles.

Direction

* Before applying dirty vehicle, be sure to wash dirt off and dry to avoid scratches.

In cases of staining, use specialised cleaners 'Silicone Off'.

1. Shake well and switch nozzle to ON.

2. Spray surface of vehicle, 1 spray for every 30cm² area.

3. Without allowing to dry, lightly wipe across the surface with a clean, dry towel.

Refold the towel to expose a fresh surface when wiping becomes difficult.

Contents - 70ml

Features

Formulated to coat polycarbonate plastic and glass, such as headlight covers, side visors, tail lamp covers, helmet shields and goggles. Specially designed curved applicator and included microfiber cloth for ease of application. Repels water under air pressure when driving. If you are a motorcycle or race car enthusiast, this product sure is suited for your needs!

Direction

1. Prepare the surfaces by washing and decontaminating.

2. Take off the cap and apply directly with felt applicator.

3. Apply gently ensuring full coverage.

4. Immediately wipe off with included towel.

*No need to wait for drying. Wipe off immediately before liquid gets dry.

Contents - 110ml

Features

Using the newly developed S.A.R.F. (Strong Adhesion + Rapid Finish) technology, the latest generation of Glaco creates an ultra-smooth layer that pushes away rain more powerfully than ever before... and it lasts for 4 months!
The swivel-head and large, square application felt allow for much easier application and make sure the corners get a proper coat.
Also repels traffic film, snow, and frost!

Direction

*Note: Wash away dirt and dust, and dry completely before application. Unscrew the cap and remove.

1. Press onto the glass and gently squeeze to release the liquid, allowing it to soak into the felt head.

2. Apply to the glass in a criss-cross pattern, squeezing to release more liquid as necessary. Leave no gaps.

3. Dry for 5-10 minutes, and wipe up with a tightly-wrung out damp towel.

Incomplete removal may lead to wiper judder.

Contents - 40 ml

Features

Repellent prevents water from remaining on the surface by lining the mirror with super-fine, microscopic studs. Spray creates an even coating and shortens the process. Suitable for reverse surfaces such as mirrors and reverse cameras.

Direction

* Clean side mirror/ reverse camera with car shampoo or 'Glaco Compound Roll On'

1. Spray evenly onto surface from a distance of approximately 15cm.
Tip: We recommend using the packaging or putting a towel around the mirror while spraying, in order to prevent fluid getting on other parts.

2. Allow to dry completely (in the summer for 1 hour, in the winter for 2 hours)

*Do not touch surface when dry.

Contents - 75ml

Features

Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Just by driving at 45 km/h or more, all the water will fly off the glass! Significantly reduces the stress and danger of driving in the rain, especially at night. Treating your glass is made easy with the built-in felt applicator.

Direction

*Note: Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.

3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel.

Contents - 120ml

Features

Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Just by driving at 45 km/h or more, all the water will fly off the glass! Significantly reduces the stress and danger of driving in the rain, especially at night. Treating your glass is made easy with the built-in felt applicator.

Direction

*Note: Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.

3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel.

Contents - 300ml

Features

Direction

Note: Make sure not to apply it on a wet glass surface, otherwise it may cause streaks and scratches

1. Prepare glass surfaces by thoroughly washing them with a pH neutral shampoo, dry and decontaminate the surface using flexible detergents, detergents or other such products. Glaco products are the best results when glass is cleaned with Glass Compound Z glass or Glaco cleaning products.

2. Make sure the glass surface is dry before application. The product may be damaged on a wet surface.

3. Remove the cap and apply the product to the disc in cross movements.

4. Wait for a visible white residue to appear on the surface.

5. Polish off residue with a clean, dry microfibre cloth.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 80ml Bottle, 1 x Pad

Features

Newly formulated triple-abrasive particles easily removes scaly spots which conventional compound cleaners cannot. Removes fluorine and sticky oil-film deposits. Restores car's glass close to original transparency. Special application pad is included.

Direction

1. Remove dust and dirt from glass with water, dry off any water remaining on surface.

2. Shake bottle well.

3. Pour liquid onto white side of included pad, begin to polish surface of glass.

4. Finally, wash glass cleanly with water.

Applications

Contents - 100ml, 2x Applicator Pad, 2x Microfiber Towel

Features - 2 Years Durability Hydrophilic Coating

H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion

FIELD TEST RESULTS

Drainage Performance Test – Water on hood receding

Less Frequent Visit to Car Wash

3 Months  Outside Exposure Test comparison to generic body glass coating

 
VENDING MACHINE (6 MONTHS AFTER APPLICATION)

MARINE BOAT (12 MONTHS AFTER APPLICATION)

OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)

 
Direction

1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.

2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.

3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).

4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.

5. After coating, leave to cure in a dry place for 12 hours.

CAUTION!!!

Applications

Contents - 200ml, 2x Applicator Pad, 2x Microfiber Towel

Features - 2 Years Durability Hydrophilic Coating

H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion

FIELD TEST RESULTS

Drainage Performance Test – Water on hood receding

Less Frequent Visit to Car Wash

3 Months  Outside Exposure Test comparison to generic body glass coating

 
VENDING MACHINE (6 MONTHS AFTER APPLICATION)

MARINE BOAT (12 MONTHS AFTER APPLICATION)

OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)

 
Direction

1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.

2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.

3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).

4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.

5. After coating, leave to cure in a dry place for 12 hours.

CAUTION!!!

Contents - Primer 100ml, Top Coat Liquid 100ml, Sponge with Buff x 2pc, Cloth x 2pc, Gloves x 2pc

Features - 5 Years Durability Coating

H-9 Dual Layer Glass Coat is super water repellent type glass coating which make use of the Japanese state of art technology. Combines 2 different types of glassy layer creating a 9H pencil hardness. Long lasting deep gloss and shine, protects from harmful elements such as dirt, bird droppings, traffic grime, UV light, water, acid rain and light scratches.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Hardness – 9H Hardness excellent resistance against micro scratches caused by wind dust and dirt

✔️ 5 Years Durability – Durability based on field and accelerated weather testing according to Japanese Industrial Standards(JIS)

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

Outside Exposure Test (After 5 Months)

After 5 months SOFT99 H9 Dual Layer Glass Coat still holding up with strong water repellency.
Generic body glass coating and fluorine based coating effect can be seen to have worn off.

Contents - 300ml

Features

It removes dirt such as carbon or sludge accumulating on the inside of the injector or combustion chamber, and restores the engine power.

Direction

1. Leave the car idling for approximately 5-6 minutes to warm the engine.

2. Stop the engine and loosen the rubber hose a bit to make enough space to insert the tube to let you spray toward the throttle chamber.

3. Turn on the engine and use a whole bottle while keeping idling at about 2000 times engine rotation.

4. Meanwhile leave it for approximately 5-6 minutes after the engine stops, and reset the rubber hose. Afterward turn on the engine and snap until white smoke is not produced.

* Be sure not to spray over the Air flow meter.

Content - 500ml

Features

pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.

Direction

1. Wash off sand, mud or dust prior to spraying.

2. Shake bottle well approx. 20 times, and turn trigger "ON".

3. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.

4. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.

* When spray over brake disc, it reacts and changes colour.

Rinse away immediately, if left on too long, may cause bad effects for brake disc.

5. Wipe off with clean towel.

Carry out brake test with low gear 2-3 times after cleaning.

* This product is formulated for wheel.

If use for car body, carefully rinse off with water afterwards.

Contents - 4000ml

Features

pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.

Direction

1. Wash off sand, mud or dust prior to spraying.

2. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.

3. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.

* When spray over brake disc, it reacts and changes colour.

Rinse away immediately, if left on too long, may cause bad effects for brake disc.

4. Wipe off with clean towel.

Carry out brake test with low gear 2-3 times after cleaning.

* This product is formulated for wheel.

If use for car body, carefully rinse off with water afterwards.

Contents - 420ml

Features

Prevents tires and plastic leather from deteriorating, also gives a glossy finish to the surface. Wax brings out the maximum natural shine in the texture of the material. Wiping not necessary when using on tire. When using on leather, wipe off with a cloth after spraying.

Direction

1. If you use tires, wash off mud or dirt in advance.

2. Hold about 15-25cm away from the tire sidewall and spray evenly.

If applying on leather spray and spread thinly with a dry cloth.

Contents - 230 ml + 1x Cloth

Features

One step cleaning and coating to give leather a hydrophobic protective layers. Protects from dirt and helps retains its natural gloss. Protect your leather upholstery from spillages and stains. Water-based formulation safe for human contact, no unpleasant petrochemical smell. One bottle will treat 20 seats.

Direction

1. Shake well, turn nozzle to 'ON'.

2. Fold cloth into quarters, exposing nappy (fluffy) side.

3. Spray directly onto leather surface from a 10 cm distance. Around 8 shots for seat, and 10 for backrest. Spray onto nappy side of cloth to apply on narrow areas (steering wheel, etc.) or when applying to perforated leather seats.

4. Use dry section of cloth on the nappy side to wipe down surface.
Allow to dry for 30 minutes.

Note: When the desired effect is not achieved, protective coating may be reinforced by repeated application and drying. We recommend reapplying once every 3 months to maintain optimal protection.

Contents - 300 ml

Features

Special cleaning mousse formulated to remove dirt without damaging leather seat. Contains no scent, which does not leave any bad odour after cleaning. Blended with Vitamin E to moisturise and prevent leather seat from deteriorating.

Direction

1. Shake can well.

2. Spray mousse on a soft cloth and rub in into leather.

3. Wipe off excess and dry with microfiber towel.

Contents - 1x 50ml Base Cleaner, 1x 8ml Coating Liquid, 2x Sponge, 1x Cloth

Features

Restore headlights, blinkers and taillights. Light one is a multi-step restoration kit that gives your headlight lenses a deep clean and removes haze and discoloration. 

Direction

1. Remove dust and dirt prior to cleaning and application.

2. Shake "Base Cleaner" bottle well, pour liquid onto included cloth and polish lense.

3. Wipe off with clean side of cloth.

4. Shake "Hard Top Coat" bottle well, pour liquid onto included sponge and spread evenly allowing to dry for 1 minute.

* The coating film takes 3-4 days to harden completely. Do not touch or wet the car for 24 hours after applying.

Contents - 500ml

Features

Water based liquid wax formulated to bring out the "Gloss", "Shine" and "Smoothness" to surface. Added mango scent to reduce chemical odor. Can be used as maintenance liquid for wax coated vehicles.

Direction

1. Wash the car to remove dust, dirt and water component.

2. Shake bottle well, turn nozzle.

3. Spray approximately 50cm² area on dry paintwork.

4. Wipe off immediately dry clean microfiber towel.
* Recommend to use microfiber towel to prevent unevenness.

Contents - 500ml

Features

SOFT99 Leather Cleaner & Conditioner not only safely and efficiently cleans leather without risk of drying or degradation, but also restores and protects leather's natural gloss and sheen, without feeling greasy or sticky.

Direction

To apply, simply spray onto the surface and wipe around with a microfiber cloth.

Allow to dry about 20 minutes after wiping

For perforated leather, apply indirectly by spraying onto the microfiber towel first.